How to choose a toilet

1. Weight

The heavier the toilet bowl ,the better. An ordinary toilet weighs about 50 kilograms, and a good toilet weighs about 100 kilograms. A heavy toilet has a high density and is relatively acceptable in quality. A simple way to test the weight of the toilet: pick up the water tank cover with both hands and weigh it.

 

2. Water outlet

It is best to have one drain hole at the bottom of the toilet lavatory. Now many brands have 2-3 drain holes (according to different diameters), but the more drain holes, the more impact the momentum will have. There are two types of toilet outlets: bottom drainage and horizontal drainage. It is necessary to measure the distance from the center of the drainage outlet to the wall behind the water tank, and buy the same model of toilet so that you can sit at the same distance. Otherwise, the toilet cannot be installed. The water outlet of the horizontal drainage toilet must be It is equal to the height of the horizontal drain outlet, preferably slightly higher to ensure smooth flow of sewage. The toilet with a distance of 30 cm is the middle drain toilet; the distance between 20 and 25 cm is the rear drain toilet; the distance above 40 cm is the front drain toilet. The model is slightly smaller If you make a mistake, the water will not be smooth.

3. Glazed surface

Pay attention to the glaze of the toilet. The glaze of a good quality toilet should be smooth, smooth, without bubbling, and the color should be saturated. After inspecting the outer surface glaze, you should also touch the toilet drain. If it is rough, it will easily cause accidents in the future.

4. Caliber

Large-diameter sewage pipes with glazed inner surfaces are not easy to get dirty, discharge sewage quickly and powerfully, and effectively prevent blockages. The test method is to put your whole hand into the toilet commode mouth. Generally, it is best to have a palm capacity.

 

5. Water tank

Leakage in the toilet water tank is generally not easy to detect except for the obvious dripping sound. A simple way to check is to drop blue ink into the toilet water tank, stir it evenly and see if there is blue water flowing out of the toilet water outlet. If there is, it means the toilet is leaking. Where the water leaks. As a reminder, it is best to choose a water tank with a higher height, so that the momentum is good. (Note: A flush volume of less than 6 liters can be classified as a water-saving toilet.)

6. Water parts

Water fittings directly determine the service life of the Water Closet. There is a big difference in the quality of water fittings between branded toilet flush and ordinary toilets, because almost every household has experienced the pain of the water tank not discharging water. Therefore, when choosing a toilet, do not ignore the water fittings. The way to identify it is to listen to the sound of the button. Crisp sound is best.

7. Flush

From a practical perspective, the toilet should first have the basic function of flushing thoroughly. Therefore, the flushing method is very important. Toilet flushing is divided into direct flushing, rotating siphon, vortex siphon, and jet siphon. Pay attention to choosing different drainage methods: toilet flushing methods can be divided into "flush type", "siphon flush type" and "siphon whirlpool type". The flush-down type and siphon flush-down type have a water injection volume of about 6 liters and have strong sewage discharge capabilities, but the sound is loud when flushing; while the whirlpool type uses a large amount of water at a time, but has a good mute effect. Consumers may wish to try the direct flush siphon toilet at Sunrisr Market. It has the advantages of both direct flush and siphon. It can quickly flush dirt and save water.

Detailed explanation of toilet classification

Divided into conjoined & split types according to type

Whether to buy a one-piece or split toilet mainly depends on the size of the bathroom space. Split-type toilets are more traditional. In production, screws and sealing rings are used to connect the base and the second layer of the water tank in the later stage. This takes up a lot of space and dirt is easy to hide in the joints.

The one-piece toilet is more modern and high-end, with beautiful appearance, rich choices and one-piece molding. But the price is relatively expensive.

According to the direction of sewage discharge, it is divided into rear-discharge type and bottom-discharge type.

 

The rear row type is also called the wall row type or the horizontal row type. According to the literal meaning, you can know the direction of its sewage discharge. When purchasing a rear-row toilet, you should consider the height of the center of the sewage outlet from the ground, which is generally 180mm;

The down-discharge type is also called the floor-discharge type or the vertical-discharge type. As the name suggests, it refers to a toilet with a sewage outlet on the ground. When purchasing a down-row toilet, you should pay attention to the distance between the center point of the sewage outlet and the wall. The distance between the sewage outlet and the wall is divided into three types: 400mm, 305mm, and 200mm. Among them, the northern market has a greater demand for 400mm pit pitch products. The southern market has a large demand for 305mm pit pitch products.

For many decoration friends, the toilet is a very important part of the bathroom space.